|
CLICK HERE TO DOWNLOAD IN
PDF FORMAT.
 
|
|
TABLE OF CONTENTS |
|
Design Prototyping for Manufacturability
Molu Olumolade, Central Michigan University; Daniel M. Chen, Central
Michigan University; Hing Chen, Central
Michigan University |
5 |
An Effective Control Algorithm for a Grid-Connected Multifunctional
Power Converter
Eung-Sang Kim, Korea Electrotechnology Research Institute;
Byeong-Mun Song,
Baylor University; Shiyoung Lee, The
Pennsylvania State University Berks Campus |
10 |
Using Inertial Measurement to Sense Crash-Test Dummy Kinematics
Sangram Redkar, Arizona State University; Tom Sugar, Arizona State
University;
Anshuman Razdan, Arizona State University;
Ujwal Koneru, Arizona State University; Bill Dillard, Archangel
Systems; Karthik Narayanan, Archangel Systems |
17 |
Pre-amp EDFA ASE Noise Characterization for Optical Receiver
Transmission
Performance
Optimization
Akram Abu-aisheh, University of Hartford; Hisham Alnajjar,
University of Hartford |
26 |
Low Power Self Sufficient Wireless Camera System
Faruk Yildiz, Sam Houston State University |
31 |
Preserving Historical artifacts through Digitization and Indirect
Rapid Tooling
Arif Sirinterlikci, Robert Morris University; Ozden Uslu, Microsonic
Inc.; Nicole Behanna, Robert Morris University;
Murat Tiryakioglu, Robert Morris University |
42 |
Fully-Reversed Cyclic Fatigue of a Woven Ceramic Matrix
Composite
at Elevated
Temperatures
Mehran Elahi, Elizabeth City State University
|
49 |
Simulation of a Tennis Player’s Swing-Arm Motion
Hyounkyun Oh, Savannah State University; Onaje Lewis, Georgia
Institute of Technology; Asad Yousuf,
Savannah State University;Sujin Kim, Savannah State University |
56 |
An Innovative Implementation Technique of a Real-Time Soft-Core
Processor
Reza Raeisi, California State University, Fresno; Mr Sudhanshu
Singh, California State University, Fresno |
64 |
Application of QFD into the Design Process of a Small Job Shop
M. Affan Badar, Indiana State University; Ming Zhou, Indiana State
University;
Benjamin A. Thomson, Reynolds & Co. |
69 |
Usage of Axiomatic Design Methodology in the U.S. Industries
Ali Alavizadeh, George Washington University;
Sudershan Jetley, Bowling Green State University |
76 |
Feasibility Study for Replacing Asynchronous Generators with
Synchronous Generators in Wind-Farm Power Stations
Mohammad Taghi Ameli, Power and Water University of Technology
(PWUT);
Amin Mirzaie, Power and Water University of Technology (PWUT);
Saeid Moslehpour, University of Hartford |
84 |
A Survey on Admission-Control Schemes and Scheduling Algorithms
Masaru Okuda, Murray State University |
91 |
