|
Engineering Sessions
Division Chair:
Ali Eydgahi
University of Maryland Eastern Shore
ENG 101:
Topics in
Control & Signal Processing
Session Chair: Willie K. Ofosu
Penn State University
Time and Place:
Wednesday - November 19 - 8:30 am - 10:30
am, Room 1
Paper#104
Title:
Reliable and Robust H∞
Control for a Class of Uncertain Descriptor Systems
Author: Lingtao Zhang, James Z. Zhang, Robert Adams, Peter Tay
Paper#116
Title: Quickest Descent control of nonlinear system with Singular Control
Chatter Eliminatio
Author: Dale McDonald
Paper#117
Title: A Trajectory following Control Algorithm for Chatter Elimination with
reduced stifness
Author: Dale McDonald
Paper#122
Title: Simulation Based Methodology for Selection and Integration of
Real-time Control Electronics into Complex Dynamic Mechanical Systems
Author: Mekonnen Tesfay Tesfu,
J. Schlattmann, Lars Ziemen
Paper#140
Title:
Analysis of Stress in Speech Using Empirical Mode Decomposition
Author:
Nyaga Mbitiru, Peter Tay, James Z. Zhang, Robert D. Adams
ENG 102:
Topics in
Robotics & Intelligent Systems
Session Chair: Payam H. Matin
University of Maryland Eastern Shore
Time and Place:
Wednesday - November 19 - 10:45 am -
12:30 pm, Room 2
Paper#006
Title: Automatic faults diagnosis by
application of neural network system and condition-based monitoring using
vibration signals.
Author: Adyles Arato Junior
Paper#034
Title:
Integration of 3D
Stereo Vision Measurements in Industrial Robot Applications
Author: Shaopeng Cheng,
Xiaoting Chen
Paper#105
Title: Implementing an Adaptive Robot with
Multiple Competing Objectives in a Service Industry Environment
Author:
Fletcher Lu, Lorena
Harper
Paper#154
Title:
Navigational Aids to
Predict The Position Of Automated Guided Vehicles With Ultrasound And Radio
Frequency Sensing
Author: Ravindra Thamma
Paper#162
Title: 2D Edge Detection through
Manipulation of Non-cooperative Featureless Payloads
Author:
Trevor P. Robinson,
Adam W. Stienecker
ENG 103
section 1: Topics in
Computational & CAD Techniques - I
Session Chair: Asad A. Salem
Texas A&M University
Time and Place:
Tuesday - November 18 - 3:00 pm - 4:45 pm,
Room 3
Paper#014
Title: Numerical Modeling for the
Calculation of Temperatures in Multiple Coated tools
Author: Andrew Otieno
Paper#021
Title: Slicing Issues in CAD Translation to
Rapid Prototyping
Author: B.V. Chowdary, D.R. Sahatoo,Fahraz Al
Paper#036
Title: An Approximate Equation for the
Condition Numbers of Well-Scaled Matrices
Author: Chin-Chieh Chiang,
John P. Chandler
Paper#054
Title: Part Design and Development through
CAD/CAM and CAE Systems: A Reverse Engineering Approach
Author:
Fahraz Ali, B.V.
Chowdary, C.A.C. Imbert
Paper#082
Title: Hand Tremor Detection via Adaptive
Empirical Mode Decomposition and Hilbert-Huang Transform
Author: James Zhang
ENG 103
section 2: Topics in
Computational & CAD Techniques - II
Session Chair: Payam H. Matin
University of Maryland Eastern Shore
Time and Place:
Tuesday - November 18 - 3:00 pm - 4:45 pm,
Room 4
Paper#083
Title: Application of Computer Aided Design
(CAD) in Knowledge Based Engineering
Author: Jared May
Paper#133
Title:
Comparison Between
Multiple Regression Models to Study Effect of Turning Parameters on the
Surface Roughness
Author:
Ravindra Thamma
Paper#191
Title: Finite Element Analysis of Cutting
Forces and Stresses on Microtools in the Micromachining of Aluminum Alloys
Author:
Andrew Otieno,
Clifford Mirman
Paper#230
Title: Stochastic FE Heat Transfer Analysis
Applied to a Storage Container Design
Author: Asad Salem,
Yousri Elkassabgi
ENG 104: Topics in
Virtual Instruments &
Distance Education
Session Chair: Idir Azouz
Midwestern State University
Time and Place:
Tuesday - November 18 - 3:00 pm - 4:45 pm, Room
5
Paper#061
Title: Integrating Virtual Lab Simulation
Software into an MET Program
Author: Joseph Fuehne
Paper#063
Title:
Application of a
Block-based Approach in Design of a Reconfigurable Virtual Instrumentation
Platform
Author: Gilbert Osei-Dadzie,
Kwame Osei Boateng
Paper#079
Title: A Classroom/Distance Learning
Engineering Course on Wireless Networking with Virtual Lab
Author: Jai P. Agrawal
Paper#137
Title: Study of Electrical Power Systems
using LabVIEW Virtual Instruments (VI) Modules
Author: Nikunja Swain, James A. Anderson
ENG 105:
Topics in
Modeling & Simulation
Session Chair: Quamrul H. Mazumder
University of Michigan
Time and Place:
Wednesday - November 19 - 10:45 am -
12:30 pm, Room 3
Paper#175
Title: Application of Software Configurable
Digital Servo Amplifiers for Electric Machine control courses
Author: Shiyoung Lee
Paper#187
Title: A Simulation Program for
Demonstration and Analysis of Closed Loop Negative Feedback Control
Author: Thomas Scott,
Paul E. Deering
Paper#199
Title: A Hands-On Kanban Simulation Kit for
Lean Manufacturing
Author:
Shaojun Wang, Doug
Koch, Yifeng Ren
Paper#205
Title: Simulink-based Simulation of
Quadrature Amplitude Modulation (QAM) System
Author: Xiaolong (James) Li
ENG 106:
Topics in
Material Science & Properties
Session Chair: Victor J. Gallardo
University of Houston
Time and Place:
Tuesday - November 18 - 9:30 am - 11:30 am, Room
2
Paper#004
Title: Optical Properties and Applications
of Nanoscale Silicon
Author: Adam A. Filios
Paper#113
Title: Post-Formed Mechanical Properties
Prediction for CAE Crash Applications
Author:
Payam H. Matin, Ali
Eydgahi
Paper#157
Title: An Analysis of the Energy
Requirement for the Improved Mechanical Properties of a Polymer-Clay
Nanocomposite
Author:
Rex Kanu, Dennis
Weldishofer
ENG 107 Section 1: Topics
in
Engineering
Education - I
Session Chair: Mir M. Atiqullah
Southern Polytechnic State University
Time and Place:
Tuesday - November 18 - 1:00 pm - 2:45 pm - Room
1
Paper#002
Title: Enhancing Students’ Math and Science
Education though Information Technology Skills in Robotics
Author:
Keith Williamson,
Nehad ElSawaf, Tarek Abdel-Salam, Tijjani Mohammed
Paper#016
Title: Active Learning in Manufacturing
Engineering Programs
Author: Arif Sirinterlikci
Paper#023
Title: Transformational Paradigm for Engineering and Technology Education
Author:
Enrique Barbieri,
William Fitzgibbon
Paper#025
Title:
Educational
Institution Strategies to Increase U.S. Innovation
Author:
Matthew E. Elam, Jerry D. Parish, Ben D. Cranor
Paper#031
Title: Continuous Improvement Process Based
on Outcome Based Education
Author: Chandra Sekhar
ENG 107 Section 2: Topics in
Engineering Education - II
Session Chair: Ali Eydgahi
University of Maryland Eastern Shore
Time and Place:
Tuesday - November 18 - 1:00 pm - 2:45 pm -
Room 2
Paper#039
Title: Enhancing Global Education: Making
Steel Connection Sculpture Available Online to Students in Developing
Countries
Author: Karen Chou,
Saeed Moaveni
Paper#094
Title: The Evolution of a Collaborative
Multi-disciplinary Engineering Design Experience
Author: Judy L. Cezeaux,
Eric W. Haffner,
Thomas Keyser
Paper#100
Title: Facing Idea Engineering Roadblocks
Author: La Verne Abe Harris
Paper#111
Title: Incorporating System-Level Design
Tools into Upper-Level Electrical Engineering Courses
Author: Wagdy H Mahmoud
Paper#139
Title: Teaching Circuits to Multiple
Disciplines: Hardware, Software, Both?
Author: Noureddine Bekhouche,
Terry Marbut
ENG 107 Section 3:
Topics in
Engineering
Education - III
Session Chair: Victor J. Gallardo
University of Houston
Time and Place:
Tuesday - November 18 - 1:00 pm - 2:45 pm -
Room 3
Paper#141
Title: Multiprocessing Computer System
Design A course with Hardware - Software System Design Approach
Author: Omer Farook
Paper#145
Title:
A Simple Deadlock
Avoidance Algorithm in Flexible Manufacturing Systems
Author: Paul E. Deering
Paper#146
Title: Improved Learning of Engineering
Mathematics Through Hands-On Real World Laboratory Experiments
Author: Peter Shull
Paper#181
Title: Intelligent Design and Engineering
Design Education
Author: Suzanne Keilson
Paper#209
Title: Teaching Electromagnetic Fields with
Computer Visualization
Author:
Yeqin Huang, Bill W.
Yang, Robert Adams, Brian Howell, James Z. Zhang, Kenneth Burbank
ENG 108 Special
Engineering
Session for Asia
* Power and Water University of Technology *
Session Chair: Mohammad Taghi Ameli
Power and Water University of Technology
Time and Place: Wednesday - November 19 - 9:00 am - 10:30 am, Room 1
& 2
Paper#056
Title:
Propagation
Characteristics of Aberrated Partially Coherent Flat-topped Beam in
Turbulent Atmosphere
Author:
F. D. Kashani, B. Ghafary
Paper#074
Title:
Recognition of the
Real Target in the Rosette Pattern Using Blind Source Separation and Hidden
Markov Model
Author:
Hossein Ebrahimi
Dinaki, Shahriar Baradaran Shokouhi, Hadi Soltanizadeh
Paper#120
Title:
Failure Analysis of
Gas Turbine Blades
Author:
Mehdi Tofighi Naeem, Seyed Ali Jazayeri, Nesa Rezamahdi
Paper#134
Title:
Analysis of
Metallurgical and Mechanical Failure of a Centrifugal Compressor
Author:
Nesa Rezamahdi, Seyed Ali Jazayeri, Mehdi Tofighi Naeem
Paper#224
Title:
A Low-power Technique
for Extracting the Main Characteristics of an Analog Sine-wave Signal
Author:
Soheil Ziabakhsh,
Seyyed Hossein Alavi Rad, Alireza Saberkari, Shahriar Baradaran Shokouhi
Paper#226
Title:
An Investigation of
Solidification Conditions and Melt Treatment on Microporosity Formation
Author:
Keivan Davamia,
Mehrdad Shayganb, Mohammad Kazem Besharati Givi, Mahmod Mousavi Mashhadi
Paper#239
Title: Reducing the Undesirable Effects of Wind Farms High-Penetration on
Frequency
Author: Mohammad Taghi Ameli, Vahid Sotudehnegad, Saeid Moslehpour
|
